Lab Search. Simplified.
Send your testing and calibration requirement for quick response
Simple
Correct
Trusted
Shriram Institute for Industrial Research (Delhi)
19, University Road, New Delhi, Delhi, India, 110007
11-27667676
9818193810/084477057
laxmirawat@shriraminstitute.org
Other Branches:
Shriram Institute for Industrial ResearchShriram Institute for Industrial Research
Shriram Institute for Industrial Research (A Unit of Shriram Scientific & Industrial Research Foundation)
- BIS
- FSSAI
Also Listed In
Discipline
- (High Voltage) Test
- % Elongation
- % Reduction of area
- %Elongation
- %Reduction Area
- 10% Fine Value
- 10% Fines value
- Abnormal Operation
- Abrasion Resistance (Scrape Resistance) Test
- Abrasion Resistance (Tape Abrasion) Test
- Abrasion resistance
- Abrasion Resistance Of Wearing Layer Testing
- Abrasion Value
- Absorption of water
- Absorption test (Water Absorption )
- Ac Leakage Test
- Accelerated ageing
- Accelerated ageing at temperature 70 degree celsius
- Accelerated ageing test 27- 100 degree Celsius
- Accelerated Extraction Tensile Strength Testing
- Accelerated Service Life Test
- Accelerated strength
- Accerleration
- Acid Resistance
- Acid Retention Capability Test On Separators Testing
- Adhesion
- Adhesion Between Components
- Adhesion Force
- Adhesion Force Test
- Adhesion of Piles
- Adhesion of plies test
- Adhesion Of Plies Testing
- Adhesion strength
- Adhesion Test
- Adhesion To Backing
- Adhesion To Backing Test
- Adhesion To Steel
- Adhesion To Steel Test
- Adhesive Strength
- Aerobic Microbial Count
- Aerobic plate count
- Ageing
- Ageing In Air Oven Test
- Aggregate Crushing value
- Air content
- Air Delivery Test
- Air Pressure Test
- Air Pressure Testing
- Alkali Aggregate Reactivity -Reduction Alkalinity
- Alkali Aggregate Reactivity -Silica Released
- Alkali Resistance
- Ambient Cycle test
- Amikacin sulphate
- Ampere-Hour & Walt Hour Efficiency Test
- Ampere-Hour & Watt- Hour Efficiency Test
- Ampere-Hour & Watt- Hour Efficiency Testing
- Ampere-Hour Watt- Hour Testing
- Anaerobic plate count
- Annealing Test ( For Copper )
- Annealing Test (For Copper) Test
- Annealing test for copper conductor
- Apparent /Open Porosity
- Apparent Density
- Apparent Porosity
- Apparent, Relative & Bulk Density
- Appearance
- Appearance Test
- Appearence
- Armour Resistance Test ( Resistivity)
- Atterberg'S Limits Testing
- Autoclaving change upto 125 degree
- Av. Breaking strength and elongation of fabric
- Av. Breaking strength of seam
- Axial Shrinkage
- B12 Assay
- Bacillus cereus
- Bacillus Cereus Testing In Processed Fruits And Vegetables
- Bacterial Count
- Bacterial Count In Malted Milk Foods
- Bacterial Endotoxin Test ( Gel Clot Method)
- Battery fluid resistance
- Battery Fluid Resistance Test
- Bend Test
- Bend Testing
- Bendability 10 to -40 degree celsius
- Bending Test
- Binder content
- Biological Testing In Cooked Food(Veg)
- Biotin Assay
- Bleeding
- Bleeding Testing
- Bond Strength
- Bond Strength of bonded material
- Breaking Load
- Breaking load & Elongation
- Breaking Load On Individual Aluminium & Steel Wire
- Breaking Load On Individual Aluminium Wire
- Breaking Load On Individual Aluminium Wire Test
- Breaking load test
- Breaking Load Tests
- Breaking strength
- Breaking strength testing
- Brimful Capacity
- brinell Hardness Testing
- Bucking
- Buckling
- Buckling Testing
- Buffering Capacity
- Bulk Density
- Bulk Density Testing
- Bulking
- Burning behaviour
- Burning resistance
- Burning Resistance Test
- Burst Test
- Burst volume
- Bursting pressure
- Bursting Factor
- Bursting pressure
- Bursting pressure testing
- Bursting Strength Testing
- Calcium Pantothenate
- California Bearing Ratio Testing
- Candida Albicans Testing In Body Cream
- Capacity
- Capacity test
- Capacity Testing
- CBR
- Change in elongation
- Change in hardness
- Change in Hardness Testing
- Change in tensile strength
- Change in volume
- Charge Acceptance Testing
- Charge Retention Test
- Charge Retention Testing
- Charpy 'V' Notch
- Charpy Impact Test
- Charpy Impact Test (V-Notch & U-Notch )
- Checking Of Dimension Testing
- Checking Of Dimensions
- Checking Of Dimensions As Per Manufacturer?S Drawing Test
- Checkingof Dimensions as per manufacturer's drawing
- Chemical resistance
- Chemical Resistance Test
- Circuit integrity test under fire condition (resistance to fire alone ) 450-900 degree Celsius
- Circuit integrity test under fire condition (resistance to fire alone) 45-900 degree Celsius
- Circuit Integrity Test Under Fire Condition (Resistance To Fire Alone) 450-900 ?C Test
- Circuit integrity test under fire condition (resistance to fire alone) 450-900 degree Celsius
- Clay,Fine Silt & Fine Dust
- Clod Bend Testing
- Clostridium perfringens
- Clostridium Perfringens Testing In Processed Fruits And Vegetables
- Coating Test
- Cold bend test
- Cold Bend, Cold Impact, Flammability Test
- Cold crushing strength
- Cold resistance
- Coliform
- Coliform count
- Coliform Count In Butter
- Coliform Count In Edible Casein
- Coliform Count In Infant Milk Substitutes
- Coliform Count In Malted Milk Foods
- Coliform Count In Whole Milk Powder
- Coliform Count Test In Condensed Milk
- Coliform Testing In Beer
- Coliform Testing In Cooked Food (Veg)
- Coliform Testing In Non Alcholic Beverages (Juices)
- Coliform Testing In Processed Fruits And Vegetables
- Coliforms
- Coliforms count
- Coliforms Count In Swimming Pool Water
- Coliforms testing
- Coliforms Testing In Packaged Drinking Water
- Coliforms Testing In Packaged Natural Mineral Water
- Collapse Test
- Color Resistance
- Colour
- Colour extraction
- Colour Fastness
- Colour fastness to light
- Combined EI/FI
- Compaction Factor
- Component mass
- Components
- Compression Set
- Compression Test
- Compressive Deformation Resistance
- Compressive Set
- Compressive Stregth Testing
- Compressive Strenght Testing
- Compressive Strength
- Compressive strength at 7 days percent of control sample
- Compressive Strength Testing
- Concrete Permeability
- Conductor resistance
- Conductor Resistance Test
- Conductor Resistance Test.
- Consistency
- Consistency Testing
- Consolidation Testing
- Construction
- Copper collar pull
- Cranking Performance Testing
- Crazing Resistance
- Crazing Testing
- Crease recovery angle
- Creepage Distance And Clearances Test
- Creepage Distance, Clearance & Distance Through Sealing Compound Test
- Creepage Distances & Clearances
- Creepage Distances & Clearances Distance Except Transient Voltage
- Creepage Distances, Clearances And Distances Through Sealing Compound
- Cyclic Temp. Variation
- Dart drop impact
- Dart Impact
- Defect Testing
- Degree Of Whiteness Testing
- Deleterious Material
- Deleterious Material Testing
- Deleterious Materials
- Deleterious Substances
- Density
- Density /Specific Gravity
- Density Testing
- Determination Of Case Depth By Micro-Hardness
- Determination Of Case Depth By Microscopic Method
- Determination of CBR test
- Determination Of Depth Of Decarburized Layer By Microscopic Method
- Determination of Flammability by Oxygen
- Determination Of Inclusion Rating Testing
- Determination Of Micro-Hardness
- Determination of specific gravity of soil
- Deviation Of Dial Calibration
- DG Set Acoustic Enclosures, Accoustically Treated DG Rooms & Machines Noise in dB (A)
- Diameter Of Aluminium & Galvanized Steel Wire Test
- Diameter Of Aluminium & Steel Wire Test
- Diameter Of Aluminium Wire & Stranded Conductor Test
- Diameter Of Aluminium Wire Test
- Diameter of Copper collar
- Dielectric Tests
- Dimension
- Dimension (Length, Inner & Outer Diameter)
- Dimension (Length, Width and Thickness)
- Dimension (Length, Width, Cover Thickness)
- Dimension (Width & Thickness)
- Dimension & Layout Testing
- Dimension & Surface quality
- Dimension for armouring material
- Dimension for armouring material
- Dimension For Armouring Material Test
- Dimension for armourning material
- Dimension of Aluminium wire
- Dimension Of Aluminium Wire Test
- Dimension stability
- Dimension Stability at deviated temperature at 20 degree Celsius
- Dimension Test
- Dimension Testing Length Width Thickness Aspect Ratio Chamfer Plan Area Wearing Face Area Squareness
- Dimension Testing Length Width Thickness
- Dimension Testing
- Dimensional Changes
- Dimensional Stability at elevated temperature
- Dimensional Test
- Dimensions
- Dimensions (Barrel wall thickness, Length, Internal Diameter )
- Dimensions (Length, Diameter and Tensile Strength/ Min.)
- Dimensions (Width Length Thickness)
- Dimensions (Width)
- Dimensions Test
- Dimensions Testing
- Drift Expansion Testing
- Drop test
- Drop Testing
- Drying Shrinkage
- Drying Shrinkage Testing
- DSC
- Ductility Test
- Ductility Test On Galvanized Steel Wire
- Ductility Test On Galvanized Steel Wire Test
- Durability
- Dynamic perforation test
- E. Coli
- E.coli
- E.Coli Test In Frozen Mutton
- E.Coli Test In Goat Meat
- E.Coli Test In Infant Milk Substitutes
- E.coli testing
- E.Coli Testing In Body Cream
- E.Coli Testing In Cooked Food (Veg)
- E.Coli Testing In Foodgrains
- E.Coli Testing In Gelatin
- E.Coli Testing In Miutton
- E.Coli Testing In Packaged Drinking Water
- E.Coli Testing In Packaged Natural Mineral Water
- E.Coli Testing In Processed Fruits And Vegetables
- Early water repellency
- Earth Resistivity
- Earthing Connection Test
- Earthing Connections
- Earthing Continuity
- Earthing Continuity Test
- Edge loading
- Edge Loading Testing
- effect of sunlight
- Efflorescence Testing
- Elect. Insulation & Elect. Strength (After humidity Treatment)
- Elect. Insulation & Leakage Current
- Electric Strength After Humid Conditioning Test
- Electric Strength At Room Temperature Test
- Electrical Characteristics- Ac High Voltage, Insulation Resistance Test
- Electrolyte Retention Testing
- Electrolytic Corrosion Test
- Elongation %
- Elongation % Testing
- Elongation at break
- Elongation Index
- Elongation Test
- Elongation Testing
- End immersion
- End Immersion Testing
- Ends/ Picks
- Ends/picks
- Endurance Test
- Environment Cycle test
- Environmental Noise Level in dB (A)
- Erythromycin estolate
- Erythromycin Stearate
- ESCR test
- Estimation Of Grain Size By Microscopic Method Testing
- Evaporation of Water
- Expansion after setting
- External Influences Test
- Extractable colour
- Faecal Streptococci
- Faecal Streptococci Testing By Plate Method In Processed Fruits And Vegetables
- Faecal Streptococci Testing In Packaged Drinking Water
- Faecal Streptococci Testing In Packaged Natural Mineral Water
- Fan Speed & Input Test
- Fan Speed And Input Test
- Fan Speed Test
- Fatigue test
- Field Density
- Field density test
- Fineness
- Fineness by Blain's air Permeability
- Fineness Modulus
- Fineness Testing
- Finish
- Fire expoure test
- Fire Resistance test
- Flakiness index
- Flame height, time of burning and Loss of Mass
- Flammability
- Flammability Test
- Flatness
- Flatness Of Surface Testing
- Flattening Testing
- Flexibility of Hose
- Flexing/ Cut growth test
- Flexural Modulus
- Flexural Stength
- Flexural strength
- Flexural Strength Testing
- Flexural Test
- Flexure Test
- Flexure Testing
- Flow
- Fracture
- Free Moisture
- Free Swell Index Testing
- Freedom from defects
- Freedom From Defects Test
- Freeze & Thaw Durability
- Friction force test
- Frost Cracking
- Frost Resistance
- Full thickness Breaking strength & elongation
- Galvanizing Test On Steel Wire
- Galvanizing Test On Steel Wire Test
- General flatness
- General Flatness Testing
- Gentamycin Sulphate
- Glue Adhesion
- Glue adhesion test
- Glue Ashesion
- Glue Shear Strength in dry state
- Gradation
- Gradation (Sieving)
- Gradation (Sieving)
- Gradation Testing
- Grain Size Testing
- Grammage
- Grammage Including Substance
- Gross Capacity
- Halogen Acid Gas Evolution Test
- Hammer Test
- Handle pull test
- Hardness
- Hardness after ageing in autoclave for 8 hours steam pressure of 100 K n/msq
- Hardness by Brinell
- Hardness by Rockwell
- Hardness by Vicker
- Hardness by Vickers
- Hardness IRHD
- Hardness Number
- Hardness SHORE A
- Hardness Testing
- Hardness- Shore A
- Hardness, IRHD
- Heat (Vicat) Softening point
- Heat ageing test
- Heat Of Hydration Testing
- Heat Resistance
- Heat resistance /thermal overload
- Heat Resistance Thermal Overload Test
- Heat resistance/ thermal overload
- Heat Shock Test
- Heavy Metals
- High Rate Discharge At Low Temperature Testing
- High Rate Discharge At Normal Temperature Testing
- High Rate Discharge Performance Test
- High Temperature creep test
- High Voltage Test Electric Strength Test
- High Voltage Test
- High voltage test/ Electric Strength test
- Horizontal Burning characteristics
- Hot AIr Treatment
- Hot Deformation Test
- Hot Set Test
- Hot Set Test For Insulation
- Hot Set Test For Xlpe
- Hot Water Output
- Hydraulic Characteristics (Acceptance & Type)
- Hydraulic Pressure test
- Hydraulic Test
- Hydraulic test of pipes upto 280 mm
- Hydraullic Pressure
- Hydrostatic Burst Pressure
- Hydrostatic Characteristics
- Hydrostatic Proof pressure
- Hydrostatic test
- Identification of fabric
- Identification of the material Content of pack
- Impact Indentation
- Impact Indentation Testing
- Impact Test
- Impact test at ambient temperature
- Impact Test At Ambient Temperature Test
- Impact Test-Charpy Testing
- Impact Testing
- Impact Value
- Impermeability
- Indentation & Hradness
- Indentation hardness
- Index Puncture Resistance Of Geomembranes And Related Products
- inflammability/ fire resistance test
- Ink Adhesion
- Inner diameter
- Input
- Input Test
- Insulation Resistance
- Insulation resistance
- Insulation Resistance & Electric Strength (After Humidity Treatment)
- Insulation Resistance And Electric Strength After Humidity Treatment A) Insulation Resistance Test B) Electric Strength Testing
- Insulation Resistance Test
- Insulation Resistance Testing
- Internal Bond
- Internal Bond (Tensile strength perpendicular to surface)
- Internal Wiring
- IRHD hardness
- Izod Impact
- Izod Impact test
- Izod Impact test (Room Temp.)
- Izod Impact Testing
- Joint adhesion strength
- Kink Test
- Knife Testing
- Lactic acid bacillus assay
- Lamp Wattage Test
- Lay Ratio Length Test
- Lay Ratio Test
- Leakage Current Test
- Leakage Test
- Length
- Length Change
- Life Test (Bench)
- Life, Storage Testing
- Light transmission
- Lightning Impulse Voltage Withstand Test
- Lime Reactivity Testing
- Linear Change
- Linear Shrinkage
- Liquid Limit
- Liquid Limit Testing
- Listeria monocytogenes
- Load bearing capacity
- Load Bearing Test
- Load quotient
- Load Testing
- Local Plainness
- Local Planeness Testing
- Loss in Mass
- Loss Of Mass Test
- Loss Of Mass Test, Breaking Strength Test
- Loss of Workability
- Low Temperature Brittleness
- Low Temperature Flexibility
- Low temperature resistance
- Low Temperature Resistance Test
- Lubricant
- Lumen Maintains Test
- Luminous Flux Test
- Macro Structural Analysis Testing
- Marking
- Marking durability
- Marking Durability Test
- Marking Test
- Marking Testing
- Marshall Stabinility
- Marshcone Viscosity
- Mass
- Mass of plaster
- Mass of Sack
- Mass of Zinc coating
- Mass Of Zinc Coating Test
- Mass per meter
- Mass per unit length & mass per unit area
- Material finer than 75 micro meter
- Materials finer than 75 micro meter
- Maximum Dry Density
- Measurement Of Acoustic Noise Level Sound Level Determination Test
- Measurement of Coating Thickness
- Measurement of Coating Thickness by Microscopy Method
- Measurement Of Impedance Voltage Short Circuit Impedance (Principal Tapping) And Load Loss Test
- Measurement Of Load Loss Test
- Mechanical endurance test ( for regulator only)
- Mechanical Resistance Testing
- Mechanical strength
- Mechanical Strength (Drop Test)
- Mechanical Test (Torsion Resistance)
- Memory test
- MFI
- Micro Strutural Analysis Testing
- Micro Vickers Hardness Test
- Minimum storage life
- Minimum Storage Life Test
- Misuse test
- Misuse Testing
- Mixing Factor
- Modulus of Elasticity Test
- Modulus Of Elasticity Testing
- Modulus of Rupture
- Modulus of rupture test
- Modulus Of Rupture Testing
- Moh's hardness
- Moisture
- Moisture Content
- Moisture Content Testing
- Moisture Movement Testing
- Moisture Resistance
- Moisture Resistance (For Regulators Only) Test
- Moisture Resistance Testing
- Moisture Test
- Moisture Testing
- Mor
- MOR/ MOE
- MOR/MOE
- MPN Coliform
- Multi internal reflectance
- Mycological Test
- Mycological Test In Block Board Specification
- Needle attachment
- Neomycin sulphate
- No.of layer of Walls
- Nominal height of belt
- Nominal top width
- Non Volatile residue
- Normal Consistency
- Nose Insertion Loss measurements in dB (A)
- Oil Fluid resistance
- Oil Fluid Resistance Test
- Oil Resistance
- Oil Resistance Test
- Operating test for pressure regulating device
- Operation under overloaded condition
- Organic Impurites
- Organic Impurities Testing
- Outer diameter
- Overload Protection
- Oxygen Index Test
- Oxygen Index Test & Temp Index Test
- P.Aeruginosa Test
- Pack integrity test
- Packaging and labeling requirements
- Permeability to Water
- Permeability test
- Permeability Testing
- Permeability to water
- Permissible Flux Density & Overfluxing Test
- Perpendicularity
- Perpendicularity Testing
- Pesudomonas aeruginosa
- pH
- Physical Examination Testing
- Physical Test On Insulation & Sheath- Ageing In Air Oven, Shrinkage Test, Hot Deformation Test, Heat Shock Test, Thermal Stability Test, Loss Of Mass In Air Oven, Water Absorption Test, Insulation Res
- Physical Test On Insulation & Sheath- Ageing In Air Oven, Shrinkage Test, Hot Deformation Test, Loss Of Mass In Air Oven, Heat Shock Test, Insulation Resistance Test, High Voltage (Water Immersion Ac
- Pilling Resistance
- Plastic Limit
- Plastic Limit Testing
- Plasticity Index
- Plate load test
- Pneumatic leak test
- Polished Stone Value (PSV)
- Polished Stone Value Psv Testing
- Polymyxin B Sulphate
- Popping And Piting Testing
- Potential Alkali Aggregate Reactivity (Mortar Bar), Length Change
- Pouch content
- Pouch integrity test
- Power Factor
- Power Factor Test
- Pozzalana Activity Index
- Pozzzolanicity
- Proctor Compaction Test (OMC,MDD)
- Proctor Compaction Testing
- Product resistance of Printed container
- Product Resistance Of Printed Containers
- Proof pressure test
- Proof Pressure Testing
- Protection Against Electric Shock
- Protection Against Electric Shock Test
- Proteolytic And Lipolytic Count Inprocessed Food Industry Water
- Provision For Earthing
- Provision For Earthing Test
- Pseudomonas aeruginosa
- Pseudomonas Aeruginosa Testing In Body Cream
- Pseudomonas Aeruginosa Testing In Packaged Drinking Water
- Pseudomonas Aeruginosa Testing In Packagednatural Mineral Water
- Pull out strength
- RCPT
- Reheating Time
- Reserve Capacity Checking Testing
- Residue on ignition
- Residue On Slaking Testing
- Resisatnce to warter
- Resistance to thermal shock
- Resistance Of Burning Test
- Resistance Of Heat Test
- Resistance of lining to n-pentane
- Resistance Test
- Resistance Test Of Aluminium Wire
- Resistance Test Of Aluminium Wire Test
- Resistance to Water
- Resistance to abrasion
- Resistance To Boiling Water Testing
- Resistance To Burning
- Resistance To Cigarette Burn Testing
- Resistance to cigarette burns
- Resistance to colour change (in Xenon Arc Light)
- Resistance to crack
- Resistance To Cracking Testing
- Resistance To Crazing Testing
- Resistance to Deformation
- Resistance to detergents
- Resistance To Dry Heat Testing
- Resistance to external blows
- Resistance to heat
- Resistance To Heat (Ball Pressure Test)
- Resistance To Heat & Fire
- Resistance To Heat, Fire And Tracking
- Resistance to Impact
- Resistance To Overcharge Testing
- Resistance To Rusting
- Resistance To Rusting Test
- Resistance to scratching
- Resistance to stain
- Resistance To Stain Testing
- Resistance to Staining
- Resistance to steam
- Resistance To Steam Testing
- Resistance to surface water
- Resistance to Water
- Resistance to water Test
- Resistance to wear
- Resistance To Wear Testing
- Resistivity & Conductance Test Of Armour (Wires Strips) Test
- Resistivity & Conductance test of Armour (Wires/Strips)
- Retention Of Charge Testing
- Reverse bend Test
- Reversion Test
- Reversion test of pipe
- Reversion Testing
- Rideal Walker Coefficient
- Ring Test
- Rockwell Hardness Testing
- S. Aureus
- S. aureus testing
- S.Auresu Testing
- S.aureus
- S.Aureus Testing By Plate Method In Cooked Food(Veg)
- Sallmonella Testing In Cooked Food (Veg)
- Sallmonella Testing In Processed Fruits And Vegetables
- Salmonella
- Salmonella spp.
- Salmonella spp. testing
- Salmonella Test In Goat Meat
- Salmonella Test In Whole Milk Powder
- Salmonella Testing
- Salmonella Testing In Egg Powder
- Salmonella Testing In Foodgrains
- Salmonella Testing In Mutton
- Salmonella Testing In Packaged Drinking Water
- Salmonella Testing In Packaged Natural Mineral Water
- Sand Content Testing
- Sand Equivalent Value
- Scrape resistance
- Scrape resistance
- Scratch Hardness Testing
- Screw & Connections
- Screw & Connections Test
- Screw Withdrawal
- Screw Withdrawal Strength Testing
- Setting Time
- Setting Time Testing
- Shear Strength
- Shear Sheet
- Shear Strength
- Shear Test Rivets Testing
- shigella spp.
- Shigella spp. testing
- Shigella testing
- Shigella Testing In Packaged Drinking Water
- Shigella Testing In Packaged Natural Mineral Water
- Shigella Testing In Processed Fruits And Vegetables
- Shock Resistance
- Shock Resitance Testing
- Shore A and Shore D Hardness Test
- Short term Hydraulic test
- Shrinkage Limit Testing
- Shrinkage Test
- Sieve Analysis
- Sieve Analysis (45 microns retained )
- Sieve Analysis Testing
- Slamming test
- Slamming Testing
- Slump Loss Of Workability Testing
- Slump Testing
- Smoke density
- Smoke Density Test
- Socket Length
- Solmonella Test In Frozen Mutton
- Soluble chromiun compounds
- Soundness
- Soundness Autoclave
- Soundness by autoclave test
- Soundness Le-Chatelier
- Soundness Testing
- Specific Gravity
- Specific Gravity Testing
- Splice strength
- Split Tensile Strength
- Squareness
- Stability & Mechanical Hazard Test
- Stability in effect of alkali
- Stability To Accelerated Ageing
- Stability To Accelerated Ageing Test
- Stain Capacity
- Stain Resistance
- Standard Penetration test
- Standard Plate Count In Processed Food Industry Water
- Standard Plate Count In Swimming Pool Water
- Standing Loss
- Staph Aureus Test In Infant Milk Substitutes
- Staph Aureus Test In Raw Milk
- Staph Aureus Test In Whole Milk Powder
- Staphylococcal Coefficient
- Staphylococcus aureus
- Staphylococcus Aureus Test In Frozen Mutton
- Staphylococcus Aureus Test In Goat Meat
- Staphylococcus aureus testing
- Staphylococcus Aureus Testing In Body Cream
- Staphylococcus Aureus Testing In Foodgrains
- Staphylococcus Aureus Testing In Mutton
- Staphylocouccus aureus
- Starting Input Speed Test
- Starting Of Motor Operated Appliances Test
- Starting Test
- Static Bending Strength Testing
- Static Puncture Strength Of Geotextiles And Geotextile Related Products Using A 50-Mm Probe
- Sterility
- Sterility Test
- Sterility Tests
- Straightness
- Straightness Testing
- Strength of tie
- Streptomycin Sulphate
- Stress Relief test
- Stretch on ring
- Stripping Value
- Stripping Value Testing
- Sulphite Reducing Anaerobes Testing In Packaged Drinking Water
- Sulphite Reducing Anaerobes Testing In Packaged Natural Mineral Water
- Surface hardness
- Suspension System
- Suspension System (For Regulators Only) Test
- Suspension System Test
- Swelling
- Swelling Pressure Testing
- Swelling Test
- Swelling Testing
- Tap Holes
- Tape abrasion
- Tape resistance
- Tear Resistance Test
- Tear Strength
- Tear Strength Tear Factor Tear Resistance Tear Index
- Tear Test
- Temp. Index Test
- Temp. rise during setting
- Temp. Rise Test
- Temperature index test
- Temperature rise
- Temperature Rise Test
- Temperature Rise, Finish Test
- Tensile Index
- Tensile Load Testing
- Tensile Strength
- Tensile Strength & Elongation
- Tensile Strength & Elongation At Break Test
- Tensile strength and Elongation
- Tensile Strength and Elongation after ageing at 100 degree Celsius for 3 days
- Tensile strength and Elongation after ageing in autoclave for 8 hours steam pressure of 100 KN/msq
- Tensile strength and Elongation at Break of Lining and Cover
- Tensile Strength And Elongation At Break Test
- Tensile strength and Elongation break for Lining and Cover
- Tensile strength and Elongation of lining & cover
- Tensile Strength at break- length, cross wise testing
- Tensile strength Elongation
- Tensile Strength for Aluminium Conductor
- Tensile strength Perpendicular to Surface
- Tensile Strength Test
- Tensile Strength Testing
- Tensile strength/ Elongation
- Tensile strength/ elongation at break
- Tensile strength/ elongation before and after ageing/ autoclaving
- Tensile strength/ Elongation/ Tear strength
- Tensile strength/elongation at break before and after ageing
- Tensile test
- Tensile Test (For Aluminum)
- Tensile Test for Aluminium conductor
- Tensile test/Elongation
- Tensile Testing
- Tension set
- Tension Test
- Terminal For External Conductor
- Terminals For External Conductors Test
- Test For C 1 Capacity & Voltage During Discharge
- Test For C 10 Capacity & Voltage During Discharge
- Test For Capacity
- Test For Capacity Testing
- Test For Loss Of Capacity On Storage
- Test For Overall Dimension, Thickness, Of Insulation & Sheath Test
- Test for removal of lid under pressure
- Test For Retention Of Charge
- Test for safety pressure relief pressure
- Test for Stability (Fungal resistance test)
- Test For Thickness Of Insulation & Sheath And Overall Diameter Test
- Test For Voltage During Discharge
- Test On Conductor- Annealing Test, Tensile Test, Conductor Resistance Test, Wrapping Test
- Test On Conductor- Annealing Test, Tensile Test, Wrapping Test, Conductor Resistance Test
- TGA
- Thermal conductivity
- Thermal stability
- Thermal Stability Test
- Thermal Stability upto 250 degree celsius
- Thickness
- Thickness index test
- Thickness of Lining and Cover
- Thickness of metallic sheath
- Thickness Of Metallic Sheath Test
- Thickness of Wearing layer
- Thickness Of Wearing Layer Testing
- Toluene Absorption
- Top Load Deformation
- Torsion Test
- Torsion Test On Galvanized
- torsion test on Galvanized steel wire for armouring
- Total aerobic count
- Total Aerobic Microbial Count
- Total Aflatoxin
- Total Aflatoxin Test In Foodgrains
- Total coliform count
- Total Coliforms Count
- Total Coliforms Testing In Egg Powder
- Total Coliforms Testing In Foodgrains
- Total Count of Pollen & Plant element
- Total Mass Per Unit Area
- Total Microbial Count
- Total Moicrobial Count
- Total Plate Count In Ice Cream
- Total Plate Count In Packaged Pasturized
- Total Plate/ Aerobic Microbial Count
- Total Viable Colony Count @ 30?C For 72 Hrs
- Total Yeast And Mould Count In Processed Fruits And Vegetables
- Transmittance
- Transparency
- Transverse (flexural) test
- Transverse Strength (Breaking Load)
- Transverse Strength Testing
- True Density /Specific gravity
- Type of Wire
- Under Water Coating Testing
- Uniformity of Zinc coating
- Uniformity Of Zinc Coating Test
- Velocity
- Verification Of Construction Requirement Testing
- Verification of Constructional Requirement
- Verification Of Constructional Requirement Testing
- Verification of Dimensions
- Verification Of Dimensions Testing
- Verification of Marking
- Verification Of Marking Testing
- Vibrio cholerae
- vibrio cholerae testing
- Vibrio Cholerae Testing In Packaged Drinking Water
- Vibrio Cholerae Testing In Packagednatural Mineral Water
- Vibrio parahaemolyticus
- Vibrio Parahaemolyticus Testing In Packaged Drinking Water
- Vibrio Parahaemolyticus Testing In Packaged Natural Mineral Water
- Vickers Hardness Testing
- Visual Examination
- Visual Examination Test
- Visual Examination Testing
- Visual inspection of Colour,Shape,Fibrous protrusion and cutting
- Visual inspection on all the content
- Volume change after ageing in autoclave for 8 hours steam pressure of 100 kN/msq
- Volume Yield Testing
- Wall Thickness
- Wall Thickness Testing
- Warpage
- Water Absorption (Gravimetric) Test
- Water Absorption
- Water Absorption (Gravimetric)
- Water Absorption Test
- Water Absorption Test (Electrical)
- Water Absorption Testing
- Water Consumption Testing
- Water content
- Water Immersion
- Water Leakage
- Water resistance
- Water vapour transmission rate
- Weathering
- Weigh of copper wire
- Weight per unit length of cable
- Weight Per Unit Length Of Cable Test
- Wet Transverse Strenght Testing
- Wet transverse strength
- Wet Transverse Test
- Wetting and drying
- Wicking Test On Separators
- Width
- Width of sheet applicable on roll
- Winding Resistance Measurement Test
- Winding test on Galvanized steel strips for armouring
- Winding Test On Galvanized Steel Strips For Armouring Test
- Workability Testing
- Working time
- Workmanship and finish Testing
- Wrapping Test (For Aluminum)
- Wrapping test for Aluminium Conductor
- Wrapping Test On Aluminium & Aluminized Wire
- Wrapping Test On Aluminium Wire
- Wrapping Test On Aluminium Wire Test
- Wt. increase/decrease
- WVTR / MVTR
- Yeast & Mould
- Yeast & Mould Count
- Yeast and Mould
- Yeast And Mould Clunt In Body Cream
- Yeast and mould count
- Yeast And Mould Count In Butter
- Yeast And Mould Count In Egg Powder
- Yeast And Mould Count In Foodgrains
- Yeast And Mould Count In Frozen Mutton
- Yeast And Mould Count In Goat Meat
- Yeast And Mould Count In Mutton
- Yeast And Mould Count In Non Alcholic Beverages (Juices)
- Yeast And Mould Count In Packaged Drinking Water
- Yeast And Mould Count In Packaged Natural Mineral Water
- Yield Strength
- Yield Strength Testing
- Yield Stress Testing
Related Labs
Products
Accrediation valid upto
31-03-2021
About Shriram Institute for Industrial Research (Delhi)
Shriram Institute for Industrial Research (SRI) is an independent, self sustaining, not-for-profit, multidisciplinary, contract research institute conducting research and development in the areas of special significance to industry, government agencies and other organizations. SRI is committed to develop, innovate, analyse and apply technology for immense products and processes.
Create your free account