Lab Search. Simplified.
Send your testing and calibration requirement for quick response
Simple
Correct
Trusted
UL India Lab, UL India Pvt. Ltd.
Laboratory Building, Kalyani Platina Campus, Sy. No. 129/4, EPIP Zone, Phase-II, Whitefield, Bangalore, Karnataka, India, 560066
080 41384400
9980980295
Other Branches:
N/A- BIS
- BIS
Also Listed In
Discipline
- Ability to withstand mechanical loads
- Abnormal Operation & Fault Conditions Back Rest, Trendelenburg
- Abnormal operation test
- Abnormal operations and fault conditions test
- Abnormal operations and faults conditions test
- Accessibility test
- Accessible connector overload test
- Accuracy of signal reproduction
- Acoustic Energy Measurement
- Active Mode
- Active mode power Consumption for multiple output power supply
- Active mode power Consumption for single output power supply
- Actuating Parts of Controls
- Additional requirements for ingress of water or particulate matter into ME equipment or ME System
- Ageing Test For Screwless-Type terminal Blocks
- Alkalinity
- Antimony
- Applicable clause 7 Test Na: Rapid change of temperature with prescribed time of transfer
- Applied force test
- Arsenic
- Audible acoustic energy
- Bail pressure test
- Ball pressure test
- Baseline reset
- BB 2.2 The effect of impacts to the matterss support platform
- BB 2.3 The effect of loading on the edge of the -Mattress Support Platform
- Beryllium
- Bonding Path resistance test
- Breakaway starting current test (Locked rotor)
- Breakdown of component test
- Bromoform
- Burst Immunity Test
- Bypass diode thermal test
- Cable Pull Test
- Cadmium
- Calcium
- Calibration test (Overload relays)
- Calibration, recalibration test
- Capacitance discharge test
- Change of Temperature
- Channel crosstalk
- Channel height and aspect ratio
- Chloride Testing
- Cleaning and Disinfection of ME Equipment's and ME Systems
- Clearance & Creepage Distances Test
- Clearance And Creepage Distances Test
- Climatic test
- Cold test
- Colour
- Combination of Medical Bed and Mattress Clause BB.4.3
- Combination of Medical Bed and Mobile Hoists Clause BB.4.2
- Common Mode Rejection
- Component failure test
- Component-Resistors
- Components & General Assembly Head Panel Removal (No Tools)
- Components & General Assembly- Designated 'C' Angle > 90 degree
- Conditioning test
- Conducted Emission Test (CE)
- Conducted RF Immunity Test
- Connector Secureness test
- Construction (tests)
- Construction, Heating Test
- Continuous Activation : Clause 201.9.2.2.5
- Copper
- Cord Anchorage
- Cord Anchorages
- cord Bending
- Cord Connected Foot Switch test
- Cord guard test
- Cord- Connected Foot Operated Control Devices
- Corrosion (Salt)
- Creep Age Distance And Clearance Test
- Creepage and Clearance distances
- Creepage distances and clearances
- Crossover lead di-electric test I
- Crossover lead di-electric test II
- Crossover potential test I & II
- Cut susceptibility test
- Cut test
- Damp heat test
- Damp heat, cyclic
- Defib- Proof Applied Parts,Energy Reduction
- Defibrillation protection
- Defibrillation protection common mode test
- Defibrillation- Proof Applied Parts
- Degree of Protection
- Degree Of Protection Test
- Detection of pulse oximeter probe cable extender faults
- Determination of End of Charge Voltage
- Determination of hazardous live parts
- Determination of Low Charge disconnect and Reconnect Voltages
- Determination of operating voltage
- Dielectric Properties
- Dielectric Properties Test
- Dielectric strength
- Dielectric Strength Test
- Dielectric Strength Tests
- Dielectric Strength- Power Frequency Withstand Test Auxiliary Circuit Insulation Test
- Dielectric Tests
- Dielectric verification
- Dielectric voltage withstand test
- Dielectric Voltage- withstand
- Dielectric Voltage- Withstand Test
- Dielectric Voltage-Withstand Test
- Dielectric withstand voltage test
- Differential mode test
- Dimension for Handles and Pedals Caluse BB.3.3
- Document Review
- Drop Impact Test
- Drop Test
- Dry Heat
- Durability of Marking Test
- Dust- IP 1X to IP 6X Degree of Protection provided by enclosures
- E.Coil
- Earth continuity
- Earth Continuity test
- Earthing and Potential equilization test
- Earthing test
- Effect Of Voltage, Frequency And Ambient Temp. Verification Test
- Electric Insulation And Leakage Current At Operating Temperature Test
- Electric Strength
- Electric strength (After Humidity test )
- Electric Strength (At operating temperature)
- Electric Strength Test
- Electrical Fast Transient (EFT)
- Electrical Resistance Measurement
- Electrodes and Patient Cables
- Electrostatic Discharge Immunity Test
- Enclosure mechanical strength
- Endurance test
- Endurance tests and thermal tests
- Energy hazard measurement test
- ENVIRONMENTAL TEST (conditions of transport and storage)
- ENVIRONMENTAL TEST (operation condition)
- External forces- Windows & covers
- Fall Test
- Fault condition tests
- Forces for propulsion
- FREE FALL TEST
- Frequency and impulse response
- Frequency Response
- Full Load
- Full Load Test and Frequency at Rate Voltage ,Measurement & Load Current, Power Imput and Slip
- Function In the Presence of Pacemaker Pulses
- Functional Tests
- Gain control and stability
- Gain indicator
- GAIN Settings and Switching
- General Mechanism Test
- General Purpose Connection And Junction Boxes Measurement Of Temperature And Power Dissipated
- Goldberger and wilson Leads
- Grain Accuracy
- Hail test
- Handle Loading
- Handling Loading Test
- Harmful Ingress of Liquids Test
- Harmfull Ingress
- Harmonic Current Emission Test
- Hazardous moving parts test
- Head/foot board assembly
- Heart rate range, accuracy, and QRS detection range
- Heat cycle test
- Heat cycling test
- Heating test
- Heating test/ Temperature rise
- Heating under normal operating conditions
- Heterotrophic Plate Count/ Standard plate count
- High temperature (Dry) Heat
- High Voltage test
- High Voltage Test, Insulation Resistance Test
- Horizontal force stability
- Hot spot Endurance test
- Hot- spot endurance test
- Humidity conditioning
- Humidity conditioning test
- Humidity freeze test
- Humidity treatment
- Humidity- freeze test
- Hygroscopic materials
- Idle State
- Impact test
- Impedance and current carrying capability
- Impulse Test, Mechanical Durability Endurance Test
- Impulse voltage test
- Incorrect Polarity
- Indelibility Of Marking Test
- Indication of incoperable Electrocardiograph
- Ingress of water
- Ingress of Water or particulate matter into ME Equipment and ME System
- Ingress of water or Particulate matter into Medical Equipment and Medical Systems
- Input dynamic range and differential offset voltage
- Input Impedance
- input Noise
- Input test
- Instability Excluding Transport
- Instability from horizontal and vertical forces
- Instability from Unwanted Lateral Movement (Including Sliding )
- Instability Hazards
- Instability in transport
- Insulation between circuits
- Insulation resistance
- Insulation Resistance Test
- Insulation test
- Internal Forces
- Internal Wiring
- Internal Wiring Test
- Interruption of power supply
- Interruption of the power supply/ Supply Mains to Medical Equipment
- Interruption of the power supply/Supply mains to ME Equipment
- Interruption of the power supply/Supply Mains tome Equipment Clauses 201.11.8
- Interruption power supply test
- Inverter Efficiency Test
- IP Test
- Iron (as Fe)
- Lead
- Leakage
- Leakage current (After Humidity Test )
- Leakage current (After Humidity Test)
- Leakage Current & Electrical Strength At Operating Temperature Leakage Current Test
- Leakage Current Test
- Legibility of Markings Voltage mismatch
- Lifting, Marking, Mechanical Impact Test
- Limitation of movement
- Limitation of touch current to a telecommunication and cable distribution system
- Limitation of Voltage,current or power
- Limited current circuit measurements
- Limited power source
- Limited power source measurement test
- Linearity and dynamic range
- Locked Rotor Test (Voltage Current Power Input and Torque )
- Locked Rotor test for cage Motors
- Low frequency (impulse) response
- Low temperature (Cold) Test
- Magnesium (as Mg)
- Magnetic Field Immunity Test
- Marking
- Marking durability test
- Marking Legibility
- Marking Test
- Max, V, VA, A measurement test
- Maximum power determination
- Maximum Temperature Test
- Maximum Voltage drop across charge controller
- ME system Leakage current
- Measurement Of Dimension Test
- Measurement of Gaps (Trapping Zones)
- Measurement of nominal operating cell temperature
- Measurement of nominal operating cell temperature (NOCT)
- Measurement of temperature coefficients
- Mechanical Operation test
- Mechanical abuse test
- Mechanical And Electrical Endurance Test
- Mechanical impact
- Mechanical load test
- Mechanical Operation And Operational Performance Capability Test
- Mechanical Operations
- Mechanical Strength
- Mechanical strength -Bump
- Mechanical Strength -Dynamic Forces
- Mechanical Strength -Foot rest
- Mechanical strength -Impact
- Mechanical Strength -Patient Support System
- Mechanical strength -Stress
- Mechanical Strength Test
- Mechanical Strength- Bed System: Sub Clause
- Mechanical Strength- End Panel Test sub Clause
- Mechanical Strength- Lifting Pole: Sub Clause
- Mechanical Strength- Threshold Test sub Clause
- Mechanical Strength- Wall Impact
- Mechanical Tests. Casting Compound
- Membrane filtration technique
- Mercury
- Mobile Equipment Force for Propulsion
- Mobile Equipment Over a Threshold
- Module breakage test
- Moisture Resistance Test
- Moisture resistance/ Spill Over test
- Mold stress relief test
- Momentary Overload Test
- Movement over a threshold
- Moving Parts Bed Function Deactivation Control Sub Clause
- Moving Parts Exposed Squeezing (Pinch) and Shearing Point Sub Clause
- Moving Parts- Bed Function Deactivation Control
- Moving Parts- Electric Powered movement-Momentary Switches sub Clause
- Multichannel Crosstalk
- No Load Test On Rated Voltage
- No-Load Running Test (No Load Current, Voltage, Power Input, Speed) Test
- Noise Level
- Non-Interchangeability Test
- Normal operating conditions-Input test
- Off mode
- On mode power measurement
- Operating Forces for Handles and Pedals Clause BB.3.4
- Operational Performance capacity
- Operational Performance Test
- Outdoor exposure test
- Output abnormal test
- Output overload test
- Output short circuit test
- Over speed test
- Over voltage and Under voltage test
- Overflow
- Overflow, Spillage, Leakage,Cleaning,Disinfection, Harmful Ingress of Liquids
- Overload of operator accessible parts
- Overload performance
- Overload Performance Test
- Overload Protection
- Overload protection of transformers and associated circuits
- Overload test
- Overload tolerance
- Pacemaker pulse display capability
- Part Leakage Current
- Partial discharge test
- Patient Entrapment in Non-Moving Parts
- Patient Lead Connection
- Performance at low irradiance
- Performance At Rated Short Circuit Capacity Test
- Performance at rated short-circuit capacity (icn)
- Performance at reduced short- circuit currents
- Performance at STC and NOCT
- Performance at STC and NOCT
- Performance under short circuit conditions
- Permissible limits test
- Ph Testing
- Pour plate method
- Power Input and current
- Power Input And Current Test
- Power input test
- Preconditioning
- Preset controls
- Pressure Test
- Properties Of Insulating Materials Test
- Protection against access live parts
- Protection Against Electric Shock
- Protection Against Electric Shock Test
- Protection against electric shock- Accessibility
- Protection against electric shock- Opening in enclosure
- Protection against electric shock- Terminals
- Protection Against Mechanical Impact
- protective bonding test II
- Protective impedance test
- Provision For Earthing Test
- Provision Of Earthing Test
- Provisions for protective resistance
- Push Test
- Radiated Electromagnetic Disturbances
- Radiation Hazards /Radiation, Toxicity And Similar Hazards
- Radiation Hazards Radiation, Toxicity And Similar Hazards Test
- Range of adjustment of Moveable sections of the Mattress Support Platform clause BB.4.4
- Rapid Temperature Cycle
- Rated Making & Breaking Capacities Under Nomal Or Abnormal Conditions Test
- Rated Service Short Circuit Breaking Capacity* Test
- Rated service short- circuit breaking capacity
- Rated Short Time Withstand Current* Test
- Rating, Marking Test
- Recording Speed
- Recovery time
- Reduced Voltage Running test (Current, Powr input, Speed)
- Rejection of pacemaker pulses
- Reliability Of Screws, Current Carrying Parts And Connections Test
- Reliability Of Terminals For External Conductors Test
- Requirement of separation between telecommunication network from earth
- Requirements for absolute interval and wave duration measurements
- Requirements for amplitude measurements
- Requirements for interval measurement on biological ECG
- Resistance of the enclosure to crushing
- Resistance To Abnormal Heat And To Fire Test
- Resistance To Corrosion Test
- Resistance to external forces
- Resistance To Heat Test
- Resistance To Heat, Fire And Tracking
- Resistance to Heat, Fire and Tracking (flame test)
- Resistance to Heat, Fire and Tracking (Glow wire test)
- Resistance to Heat, Fire and Tracking (Needle flame)
- Resistance To Heat, Fire And Tracking Resistance To Heat And Fire Test
- Resistance to Impact
- Resistance To Rusting Test
- Revered Battery Connection
- Reverse Battery Connection/ Overcharging
- Reverse Current Overload test
- Ring Wave Immunity Test
- Robustness of terminations test
- Rough Handling - Drop Test
- Rough Handling - Roll Off Step Test
- Rough handling test
- Salt Mist, cyclic
- Salt Mist Test
- Screw And Connection Test
- Screws and Connections
- Secondary circuit test
- Secureness and Pullout test
- Selenium
- SELV reliability test
- Service short-circuit capacity (ics)
- Settings and data storage following short interruptions or automatic switchover
- Short Circuit Capacity Marking Test
- Short circuit performance at 1500 A
- Short Circuit Protection and Short Circuit Withstand
- Short Circuit test
- Short Circuiting in Lieu of Spacing
- Short time current sequence test
- Shorting one MOP
- Sleep Mode
- Solid wire tightening test
- Spacings
- Spillage
- Stability & Mechanical Hazard
- Stability & Mechanical Hazards. Test
- Stability And Mechanic Hazards Test
- Stability and transportability test
- Stability in normal use Castor Locking
- Stability in Normal use Lateral Stability, Longitudinal stability sub Clause
- Stability in Normal use stability with lifiting pole
- Stability test
- Stand by Mode Power consumption
- Stand by Power measurement
- Static forces due to loading from persons
- Static rigidity test
- Steady force test
- Strain relief test
- Strength Of Actuator Mechanism Test
- Strength of Handle test
- Stress relief test
- Supply Connection & External Flexible Cords Test
- Supply connection and external flexible cables and Cord
- Surface Corners, Edges- Patient Entrapment
- Surge Immunity Test
- Surge test
- Suspended Masses Side Rail Strength
- Suspended Bed 2X SWL Masses
- Suspended Masses Accessories 2X SWL
- Suspension system / Safety Device Loading
- Suspension System With safety Device Loading Test
- Suspension System Without safety Device Loading Test
- Sweep speed
- Synchronizing pulse for cardio version
- Tab pull test
- Tall R-Wave rejection capability
- Technical alarm condition indicating inoperable ME equipment
- Temp. Rise Limits Test
- Temp. Rise Verification Test
- Temperature and overload Control Device
- Temperature Compensation for Thresholds
- Temperature Rise Test
- Temperature Rise Test (Heating) Test
- Temperature Rise Test (Thermal Test)
- Temperature test
- Temperature Test: Service Temperature Maximum Surface Temperature
- Temperature Tests
- Tensile Force- Mechanical Tests
- Terminal Insulating Material For Terminals
- Terminal For External Conductor
- Terminal For External Conductor Test
- Terminal for external conductors
- Terminal Torque test
- Test applicable to PENDAs designed for operation at ambient temperature of between 40 to -25 degree Celsius
- Test applicable to PENDAs designed for operation in arctic climate
- Test for Reliability at 40 degree Celsius
- Test for Resistance to Impact
- Test of dielectric properties
- Test of protection against electric shock
- Test of reliability of Screws, current-carrying parts and connections
- Test of reliability of terminals for external conductors
- Test of resistance to heat
- Test of temperature- rise and measurement of power
- Test Type Ad see Clause 5.3
- Test Type BD see Clause 5.3
- Test Type Db Variant 1
- Test with calibration ECGS
- Thallium
- Thermal Cycling for spaces filled with insulating material
- Thermal cycling test
- Thermal endurance to Cold
- Thermal endurance to heat
- Thermal Stability Test
- Time to alarm for heart rate alarm conditions
- Timing Accuracy
- Toppling test
- Torque test
- Torque test on bushings
- Torque test on covers
- Torque test on Screw terminals
- Torque test- Rod antenna
- Total Chromium
- Total Coliform Bacteria
- Total Dissolved Solids
- Total Hardness
- Touch current test
- Transformer and wire insulation electric strength test
- Transformer Dielectric Voltage Withstand
- Transformer Overload
- Transformer Overload and short- circuit tests
- Transformer overload test
- Transformer short circuit
- Transformer short circuit test
- Transient Voltage
- Trapping Zone- Gaps
- Tripping Limits And Characteristics Test
- Turbidity
- Type tests for dust exclusion by enclosures
- Under/Over voltage test
- Use with Cardiac pacemakers
- UV preconditioning test
- Verification of ability to withstand overload currents
- Verification of ageing of electronic components
- Verification of behavior of RCCBs in case of current surges caused by impulse voltages
- Verification of Conventional operational operational performance
- Verification of conventional operational performance
- Verification Of Conventional Operational Performance Test
- Verification of creepage and clearances
- Verification of degrees of protection of enclosed contactors and starters
- Verification of dielectric properties
- Verification of dielectric withstand
- Verification of mechanical Charateristics
- Verification of mechanical properties of terminals
- Verification of mechanical strength of doors
- Verification of operation and operating limits
- Verification of rated making and breaking capacities, changes-over ability and reversibility. where applicable
- Verification of reliability
- Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
- Verification of resistance of the insulation against high impulse Voltages
- Verification of Resistance of the resistance of the insulation against high impulse voltages
- Verification of resistance to axial load of metal inserts in synthetic material
- Verification of Resistance to Mechanical impact
- Verification of Resistance to Mechanical shock
- Verification of resistance to mechanical shock impacts induced by sharp edged Objects
- Verification of resistance to shock load
- Verification of resistance to static load
- Verification of temperature rise
- Verification of the behavior of RCCB's functionally dependent on line voltage, classified under 4.1.2.1, in case of failure of the line voltage
- Verification Of The Coordination At Rated Conditional Residual Short Circuit Current Test
- Verification of the Coordination at the rated Conditional Residual Short- Circuit current (iAc)
- Verification of the coordination at the rated Conditional short- circuit current (Inc)
- Verification of the Coordination at the rated making and breaking capacity (im)
- Verification of the correct operation at residual currents with d.c. components
- Verification of the operation of the test device at the limits of rated voltage
- Verification of the performance of terminal assemblies
- Verification of the rated making and breaking capacity (im)
- Verification Of The Voltage Drop
- Verification of thermal Characteristics
- Verification of trip-free mechanism
- Vertical force stability
- Vibration and Noise- Noise of Bed < 65db(A)
- Visual inspection
- Volatile Organic Compounds
- Voltage Dips, Short Interruption & Voltage variation Immunity Test
- Voltage drop test
- Voltage Fluctuation & Flicker Test
- Voltage limitation test
- Voltage or Charge Limitation
- Wall Or Ceiling or Equipment Rack Mounting Test
- Water - IPX! to IPX7 Degree of Protection provided by enclosures
- Water immersion test
- Water Spray test
- Wet Insulation Resistance test
- Wet leakage current test
- Winding Insulation test
- Winding Resistance Test
- Withdrawal of main plug
- Working voltage Measurement
- Working Voltage measurement test
- Zinc and Barium
Related Labs
Products
Accrediation valid upto
31-03-2021
About UL India Lab, UL India Pvt. Ltd.
UL INDIA LAB, UL INDIA PVT. LTD., BANGALORE founded in 1894, is a global company with more than 120 years of relevant experience in the field of inspection, advisory, and testing services, It has labs and offices across four continents. In India, it is located in EPIP Zone, Phase II, Whitefield, Bangalore. It provides quality testing services in the areas which include, Air and Water field testing, Chemical emission testing, Dietary supplement testing, EMC testing, Energy Efficiency Testing, Materials Testing, Non-Clinical testing and various others. It has created a niche for itself in the field of Analytical, Chemical, Physical, Sensory and Accelerated Weathering testing. UL is committed to provide excellent services to its clients and make this world a safer place to live. UL created the first program to validate zero-waste claims. It is known for its deep dedication towards sustainable development and environment-friendly industrial practices.
Create your free account